Oriental Heat Treatment (M) Sdn. Bhd.
(266558-W)
Machines
Production Equipments
A) UBE 600 Mark II Seal Quench Furnace - 7 Units
| Manufacturer | :Oriental Engineering (Japan) |
| Usage | :Carburizing, Carbonitriding, Bright Quenching |
| Working Temperature | :Normal 800~950°C |
| Heating Method | :Electric Energy Heating System (Radiant Heater System) |
| Effective Furnace Dimension | :600mm (W) X 600mm (H) X 1200mm (L) |
| Treating Capacity | :600~650 KG (Gross) |
| Quenching Oil type | :Cold type & Semi Hot type |
| Quenching Oil Cooling system | :Water Cooling using Plate type heat exchanger |
| Temperature Controller | :Thermocouple with PVH controller |
| Atmosphere controller | :CP sensor, uniflow control and PVH controller |
B) BCA Alkaline Cleaner - 3 units
| Manufacturer | :Oriental Engineering |
| Usage | :Cleaning |
| Working Temperature | :Normal 60~90°C |
| Heating Method | :Electric Energy Heating System (Element Heater System) |
| Effective Furnace Dimension | :600mm (W) X 600mm (H) X 1200mm (L) |
| Treating Capacity | :600~700KG (Gross) |
| Temperature Controller | :Thermocouple with Temperature controller |
C) BTF 600 Tempering furnace - 3 units
| Manufacturer | :Oriental Engineering |
| Usage | :Tempering, Stress Relief |
| Working Temperature | :Normal 80~680°C |
| Heating Method | :Electric Energy Heating System (Element Heater System) |
| Effective Furnace Dimension | :600mm (W) X 600mm (H) X 1200mm (L) |
| Treating Capacity | :600~700KG (Gross) |
| Temperature Controller | :Thermocouple with Temperature controller |
D)UM-8050 Mesh Belt Type Continuous Heating Furnace – 1 unit
| Manufacturer | :Oriental Engineering (Japan) |
| Usage | :Carburizing, Carbonitriding, Bright Quenching |
| Working Temperature | :800 ~ 900°C |
| Heating Method | :Electric Energy Heating System (Radiant Heater System) |
| Effective Furnace Dimension | :760mm (W) X 80mm (H) |
| Treating Capacity | :Max 450 kg/hr |
| Quenching Oil Type | :Cold type |
| Quenching Oil Cooling System | :Water Cooling using Plate type heat exchanger |
| Temperature Controller | :4 zone with thermocouple |
| Temperature Controller | :Drip-Feed Gas, O2 sensor |
E)UNB-FE 600 Gas Soft Nitriding Furnace – 1 Unit
| Manufacturer | :Oriental Engineering (Japan) |
| Usage | :Gas Soft Nitriding & Nitriding |
| Working Temperature | :400 ~ 600°C |
| Heating Method | :Electric Energy Heating System (Radiant Heater System) |
| Effective Furnace Dimension | :600mm (W) X 600mm (H) X 1200mm (L) |
| Treating Capacity | :Max 600 kg |
| Quenching Oil Type | :Oil Cooling & Gas Cooling |
F)Rubber Belt Shot Blasting Machine - 2 units
| Manufacturer | :Tochu Thailand Co., Ltd |
| Usage | :Surface Polishing |
| Barrel Size | :Dia 700 x 800 (W) mm |
| Shot Size | :Dia 0.40mm (SAE110) |
| Permission Load | :below 300 kg (Gross) |
Inspection Equipments
F) Olympus PME 3 Metallurgraphic Microscope - 1 Unit
Magnification 50X, 100X, 200X, 400X
Equipped with Polaroid PM-CPH405 Camera
G) MVK H1 Microvikers Hardness Tester - 1 Unit
Loading 10 gram ~ 1000 gram
Equipped with Watec 902B Auto Iris
Equipped with Mitutoyo Digmatic Mini Processor DP 1 H
H) MMT-X7 Digital Hardness Tester - 1 Unit
Loading 5 gram ~ 1000 gram
I) HR-500 Wizard Hardness Tester - 2 Unit
Types: Rockwell, Rockwell Superficial, Brinell
J) ARK 600 Rockwell Hardness Tester - 1 Unit
Loading 60 kg, 100 kg, 150 kg
K) HL 80 Portable Hardness Tester - 1 Unit
L) Metallorgraphic Polisher - 2 Unit
Alumimina Powder 5 Microns
M) Rapid Press Mounting Machine - 1 Unit
Temperature 110°C, Bakelite Powder
N) Metallurgraphic Cutter - 2 Units
Abrasive cutter
Calibration Equipments
O) Fuji Electric Compact Type Gas Analyzer - 1 Unit
P) 9 Points Test Equipment - 1 Set
Thermocouple Wire
Chart Recorder
Q) Yokogawa Handy Cal (Temperature Calibrator) - 1 Unit
R) KEYENCE NR1000 Data Acquisition System - 1 Unit
